Contents RIGOL
DS4000E User’s Guide XVII
SINGLE ......................................................................................... 1-17
Multi-function Knob ........................................................................ 1-18
Navigation Knob ............................................................................ 1-18
Default ......................................................................................... 1-19
Print ............................................................................................. 1-19
Function Keys ................................................................................ 1-19
Record .......................................................................................... 1-20
User Interface ...................................................................................... 1-21
To Use the Security Lock ....................................................................... 1-27
To Use the Built-in Help System ............................................................. 1-28
Chapter 2 Vertical System Setting ...................................................... 2-1
To Turn the Channel On/Off .................................................................... 2-2
To Adjust the Vertical Scale .................................................................... 2-3
To Adjust the Vertical Position ................................................................. 2-4
To Specify the Channel Coupling ............................................................. 2-5
To Specify the Bandwidth Limit ............................................................... 2-6
To Set the Probe ................................................................................... 2-6
Passive Probe ................................................................................. 2-7
Active Probe ................................................................................... 2-8
Tek Probe ....................................................................................... 2-9
To Specify the Input Impedance ............................................................ 2-11
To Turn Waveform Invert On/Off ............................................................ 2-12
To Specify the Vertical Reference ........................................................... 2-12
To Specify the Amplitude Unit ................................................................ 2-13
To Set the Channel Label....................................................................... 2-13
To Set the Delay Calibration................................................................... 2-15
Chapter 3 Horizontal System Setting .................................................. 3-1
To Adjust the Horizontal Time Base ......................................................... 3-2
To Adjust the Horizontal Position ............................................................. 3-3
To Specify the Time Base Mode .............................................................. 3-4
Y-T Mode ....................................................................................... 3-4
X-Y Mode ....................................................................................... 3-4
Roll Mode ....................................................................................... 3-7
To Turn Delayed Sweep On/Off ............................................................... 3-8
To Specify the Horizontal Reference ....................................................... 3-10
Chapter 4 Sample System Setting ...................................................... 4-1
To Next Page
Loading...
Need help?
General
