Rigol DS4024E User Manual

RIGOL Chapter 13 System Function Setting
13-8 DS4000E User’s Guide
System-related
Sound
When the beeper is enabled, you can hear the sound of the beeper when you
operate a front panel key or menu softkey or when a prompt message pops up.
Press Utility and press Sound to select (on) or (off). The default is off.
When the sound is turned on, will be displayed at the lower-right side of the
screen.
Language
This oscilloscope supports menus in multiple languages. It provides Chinese/English
help information, prompt messages and interface display.
Press Utility  Language; turn the multi-function knob to select the desired
language and press the knob. You can also press Language continuously to switch
the current language type.
System Information
Press Utility  System  System Info to enter the system information interface.
The system information contains the manufacturer, device model, instrument serial
number, software version number and hardware version number.
Power-on Load
You can set the system configuration to be loaded when the oscilloscope is powered
on again after power-off.
Press Utility  System and press Power On to select “Last” or “Default”.
 Last: return to the setting of the system at last power-off.
 Default: return to the factory setting of the system.

Rigol DS4024E Specifications

General

Brand	Rigol
Model	DS4024E
Category	Test Equipment
Language	English