Rigol DS4024E User Manual

Chapter 13 System Function Setting RIGOL
DS4000E User’s Guide 13-9
System Time
The system time is displayed at the lower-right side of the screen in “hh:mm
(hour:minute)” format. When printing or storing a waveform, the file output will
contain this time information.
Press Utility  System  System Time to open the time setting menu. In this
menu,
1. Set the system time
1) Press System Time to open the system time interface.
In this interface, the system time is displayed in “yyyy-mm-dd
hh:mm:ss” format. The item that can be currently modified (namely, the
item currently selected) is displayed in green and the other items are
displayed in white.
2) Turn the multi-function knob
to adjust the item currently selected.
3) Press the multi-function knob
to confirm the current item and select the
next item.
The order of time modification is year  month  date  hour  minute
 second.
4) Repeat steps 2) to 3) to finish the system time setting.
The setting range of each item of the system time conforms to the convention.
 Year: 1999 to 2099
 Month: 01-12
 Date: 01-31 (28, 29 or 30)
 Hour: 00 to 23
 Minute: 00 to 59
 Second: 00 to 59
2. Apply the system time currently set
Press Apply to put the current setting into effect. The time at the lower-right
side of the screen will be updated.

Rigol DS4024E Specifications

General

Brand	Rigol
Model	DS4024E
Category	Test Equipment
Language	English