Rigol DS4024E User Manual

RIGOL Chapter 12 Store and Recall
12-16 DS4000E User’s Guide
Factory
Pressing Default  OK can restore the oscilloscope to its factory state (refer to the
table below).
Table 12-2 Factory
Parameter List
Horizontal Setting (HORIZONTAL)
Vertical Setting (VERTICAL)
Acquisition Setting (Acquire)
Trigger Setting (TRIGGER)
Display Setting (Display)
Cursor Setting (Cursor)
Storage Setting (Storage)
Utility Function Setting (Utility)
Math Operation Setting (MATH  Operation)
Protocol Decoding (Decode 1, Decode 2)
Reference Waveform Setting (REF)
Parameter Factory
Horizontal Setting (HORIZONTAL)
Horizontal Time Base 1 μs
Horizontal Position 0 s
Delayed Sweep OFF
Time Base Type Y-T
Time Base Scale Coarse
Horizontal Reference The Center of the Screen
Vertical Setting (VERTICAL)
Vertical Scale 1 V
Vertical Position 0 V
CH1 Switch ON
CH2 Switch OFF
CH3 Switch OFF
CH4 Switch OFF
Channel Coupling DC
Bandwidth Limit OFF
Input Impedance 1 MΩ
Channel Invert OFF
Vertical Scale Coarse
Channel Unit V

Rigol DS4024E Specifications

General

Brand	Rigol
Model	DS4024E
Category	Test Equipment
Language	English