Chapter 2 Vertical System Setting RIGOL
DS4000E User’s Guide 2-1
Chapter 2 Vertical System Setting
DS4000E provides four input channels (CH1 to CH4) and provides independent
vertical control system for each channel. As the vertical system setting methods of
the four channels are completely the same, this chapter takes CH1 as an example to
illustrate the setting method of the vertical system.
The contents of this chapter:
To Turn the Channel On/Off
To Adjust the Vertical Scale
To Adjust the Vertical Position
To Specify the Channel Coupling
To Specify the Bandwidth Limit
To Set the Probe
To Specify the Input Impedance
To Turn Waveform Invert On/Off
To Specify the Vertical Reference
To Specify the Amplitude Unit
To Set the Channel Label
To Set the Delay Calibration
To Next Page
Loading...
Need help?
General
