Rigol DS4024E

RIGOL Contents
XX DS4000E User’s Guide
Chapter 9 Pass/Fail Test .................................................................... 9-1
To Enable or Disable the Pass/Fail Test Function ........................................ 9-2
To Start or Stop the Pass/Fail Test Operation ............................................. 9-2
To Specify the Source ............................................................................. 9-3
To Set the Test Mask .............................................................................. 9-3
Screen Region Mode ........................................................................ 9-4
Cursor Region Mode ......................................................................... 9-5
To Turn the Test Result Display On/Off ..................................................... 9-7
To Set the Output Form of Test Failure ..................................................... 9-7
To Save the Test Mask Range .................................................................. 9-9
To Load the Test Mask Range .................................................................. 9-9
Chapter 10 Waveform Recording ................................................. 10-1
To Record Waveform Using the “Record” Mode ....................................... 10-2
To Record Waveform Using the “Open” Mode .......................................... 10-5
To Play Back the Waveform Recorded ..................................................... 10-6
Manual Playback ............................................................................ 10-6
Auto Playback ............................................................................... 10-7
To Analyze the Recorded Waveform ..................................................... 10-10
To Set the Template (Trace Mode) ................................................. 10-15
To Create the Pass/Fail Test Mask (Pass/Fail Test Mode) .................. 10-16
Chapter 11 Display Control .......................................................... 11-1
To Specify the Display Type ................................................................... 11-2
To Set the Persistence Time .................................................................. 11-2
To Set the Waveform Brightness ............................................................ 11-4
To Specify the Screen Grid Type............................................................. 11-4
To Set the Grid Brightness..................................................................... 11-4
To Set the Menu Display Time ............................................................... 11-5
Chapter 12 Store and Recall ........................................................ 12-1
Storage System .................................................................................... 12-2
Storage Type ....................................................................................... 12-3
To Perform Internal Storage and Recall .................................................. 12-6
To Perform External Storage and Recall .................................................. 12-7
Disk Management ................................................................................ 12-9
To Select File Type ....................................................................... 12-10
To Create a New File or Folder ...................................................... 12-10
To Delete a File or Folder .............................................................. 12-14