Chapter 1 Quick Start RIGOL
DS4000E User’s Guide 1-13
3. Video Output
Through this interface, the oscilloscope can be connected to an external monitor
for clearer waveform display. At this point, the display of the oscilloscope is still
operational.
4. LAN
Through this interface, the oscilloscope can be connected to the local area
network for remote control. This oscilloscope conforms to LXI-C standard and
can quickly build test system with other devices.
5. USB DEVICE
Through this interface, the oscilloscope can be connected to PictBridge printer to
perform the print operation or PC to control the oscilloscope remotely.
6. USB HOST
You can connect a USB storage device via this interface to perform external
storage and recall. You can also extend a GPIB interface via this interface using
the USB-GPIB interface converter (optional) provided by RIGOL to realize GPIB
communication.
Note: There is also a USB HOST interface at the front panel.
7. Lock Hole
Use a security lock (available separately) to lock the oscilloscope to a fixed
location via this lock hole.
8. AC Power Socket/Power Switch
AC power input terminal. This oscilloscope accepts two kinds of AC power
supplies: 100 V-127 V, 45 Hz-440 Hz and 100 V-240 V, 45 Hz-65 Hz. For the
power connection method, refer to “To Connect to Power Supply”.
To Next Page
Loading...
Need help?
General
