52
Processing Principles
• If the POWER switch is set to OFF during transient store, store
continues until address 500, and the unit then turns itself off after 10
seconds.
• For 10 seconds after transient store has ended, recall cannot be carried
out.
Timer store
It is also possible to carry out storing under timer control, by specifying a start
time, repeat interval, and store count. The level trigger or external trigger cannot
be used.
Set the TIMER item on the MEMORY menu to ON.
If the STORE key is pressed again while storing is in progress, store is
terminated at that point.
Manual store
The store start address is the currently specified memory address.
Example: Storing starts at address 490. When address 500 is reached, it
continues from address 1.
When linear averaging and peak hold are selected, averaging begins at the
start time and store is carried out when averaging ends.
To Next Page
Loading...
Need help?
General
