78
Compact Flash Card
Deleting data from a card (mass memory data)
Data can be deleted from a compact flash card in block units.
1. Insert a compact flash card in the slot, as described above.
2. Call up the PCMCIA CARD menu.
3. Use the keys to select "BLOCK".
4. Use the
keys to select the number of the block you want to delete.
5. Use the keys to select "DELETE".
6. Use the keys to change the setting to "EXEC".
7. Press the MENU (ENTER) key.
All data in the specified block are deleted.
Formatting a card
1. Insert a compact flash card in the slot, as described above.
2. Call up the PCMCIA CARD menu.
3. Use the keys to select "FORMAT".
4. Use the keys to change the setting to "EXEC".
5. Press the MENU (ENTER) key.
The card is formatted to create the directory structure and key file.
Note
Before using a card for the first time, it must be for-
matted.
Error indication
If there is a problem with the card, one of the following error messages appears.
Error message Meaning
NO CARD No card is inserted.
BAD CARD Type of inserted card does not match the unit.
READ/WRITE ERROR Read or write cannot be performed.
NO SPACE There is not enough empty space on the card.
To Next Page
Loading...
Need help?
General
