User Functions and Settings
Page 44
Reset SIM: After charging a prepaid SIM card, the user has to reset
the SIM expire time manually. The time period duration for
expiration is defined by your installer.
User call: Use this function to receive the SIM credit level using
the voice channel. Upon accessing this option, a dial
tone is received and the LightSYS™2 keypad functions as a GSM
telephone. You can dial and listen to messages as with a regular
telephone. To end the call press the key.
Notes:
• The outgoing call will always be executed
through the GSM channel.
• Talking is not optional during the call.
• This option can be used to get any provider
information.
• The call can be established to any phone number
Advanced…
- √
Switch AUX: Interrupts the power supplied to the
system's smoke detector(s) for a predetermined
interval, thus resetting and "readying" them for
subsequent alarms
Void Report Programming
- √
Some protocols have a report code to the monitoring station for
entering and exiting the installer programming. To
avoid the entering report and save time, this function
postpones the report for two minutes during which
the installer can enter the programming menu and no
report will be made.
Service Mode
- √
Used to silence an alarm initiated by any tamper for a
Service Time period specified by your installer.
Use this option when replacing the accessory battery.
-
Menu Structure
GM
U
In.
To Next Page
Loading...
