User Functions and Settings
Page 45
Overload restore:
Use this option to restore overloading
of the system’s switched power supply. If the
overload condition is still present, disconnect all loads
from AUX.
Follow Me
Define
- √
Destination: Used to define (up-to-16) Follow Me
destinations according to its type: Voice message,
SMS or E-mail. For more information refer to page 33.
Label: Identifying labels for the Follow Me
destination. Enter the labels according to the
instruction defined for user label on page 30
Menu Structure
GM
U
Terminate Follow Me √ - -
If Follow Me destination(s) were chosen, their
operation can be terminated. Use this function when
an alarm has been tripped and there is no need to
utilize the Follow Me feature.
Test Follow Me √ - √
Used to test Follow Me reporting.
View
Trouble √ √ √
Should be used when the system has detected a problem, which is
evidenced by the rapid flashing of the
power icon, as described on page 7.
Alarm Memory
Displays the five most recent alarm conditions stored by the
system.
Partition Status
To Next Page
Loading...
