User Functions and Settings
Page 46
Displays the partitions' status, the troubles in the system and all
“not ready” zones.
Pressing on the key from the normal operation mode
displays the status of the partition to which the keypad
is assigned. Pressing the sequence [CODE]
from the normal operation mode displays the status of all the
partitions assigned to the user code.
Zone Status
Allows the display of all system zones and their current status.
Service Info
Allows the display of any previously entered service information
and the system version
[Sytem Entry Level] Status of current user
System Version The installed firmware version of LightSYS™2.
Serial Number The 11-digit number used by the cloud to identify
the panel
Panel ID The 15-digit number used by the end-user for self-
registration to the RISCO cloud (See page 2)
Menu Structure
GM
U
In.
IP Address √ - √
Use this option to view the IP address of the LightSYS™2. This
option is available only if IP module is defined in the system
Advanced
-
MS Test- Use this option to initiate a test message to the
Monitoring Station according to IMQ and EN50131 requirements
Codes/Tags
Define √ √ -
To Next Page
Loading...
