3.2.5.1.1.5.5 Quit Pre Paid Energy Output
The screen allows user to exit the Pre Paid Energy output menu.
Pressing “ ” key advances to the “Pre Paid Energy Output” menu (see
Section 3.2.5.1.1.5) and pressing “ ” key advances to “New Recharge”
menu (see Section 3.2.5.1.1.5.4).
Pressing “ ” key advances to “Relay Selection” menu (see Section
3.2.5.1).
XXXX
3.2.6 Load Health Parameter Selection
3.2.6.1 Unbalance Voltage Limit
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
This screen allows the user to set Trip point for instruments when the
voltage is unbalance.
Pressing “ ” key accept the present value and advances to “Unbalance
current limit” screen (see Section 3.2.6.2). Pressing “ ” key advances to
“Quit Load Health” screen (see Section 3.2.6.7).
Pressing “ ” key advances to Edit mode.
(Flashing decimal point indicates the cursor position). Initially the “decimal
point must be selected, pressing the “ ” or “ ” key moves the decimal
point position to the right & left respectively until it disappears, which
means that it has reached # # # #. after which it returns to #. # # # or # # #.
#
Pressing the “ ” key accepts the present decimal point position and
advances to first digit. Press the “ ” and “ ” keys to scroll the values
of the first digit.
Press the “ ” key to advance to next digit. Similarly, enter second, third
and fourth digits also. Value ranges from 5% to 20%
Note: Default value is set to 20%.
Edit mode
63
To Next Page
Loading...