2. SETTING
IMCB04-E9
8
(2) SL2 (Engineering unit selection and cooling type selection)
The upper 2 digits are not used. Do not change the setting, as this may cause malfunction.
Factory set value varies depending on the instrument specification.
Set value Description
0
°C
Engineering unit selection
1
°F
0 Air cooling (A type) *1 Cooling type selection
1 Water cooling (W type) *2
00 00## Fixed
*1 A type... Heat/cool PID action with autotuning (Air cooling)
*2 W type...Heat/cool PID action with autotuning (Water cooling)
To Next Page
Loading...
