Rhein-Nadel Automation GmbH 4
VT-BA-ESR2000_EN_2023.docx
Attention
Read this document carefully and observe the safety directives before commencing any work.
Document description:
This document provides assistance in choosing your product. You will also find information on mechanical
and electrical installation, operation, product extensions and accessories.
Non-observance may cause trouble with the product or the environment, reduce the product lifetime or lead
to other damage.
Notice
This notice identifies useful tips for use of the controller.
Attention!
This symbol identifies hazardous situations.
Non-observance of such warnings may cause irreversible injury or even death!
Non-observance of the following fundamental safety measures and directives may lead to severe injury and
damage to property!
Meeting the requirements given in the related documentation is a precondition for safe and trouble-free op-
eration and for achieving the product properties specified. Further additional safety directives in the other
sections must be observed as well.
Attention!
Any work on electrical equipment of the machine/system shall be carried out exclusively by a
professional electrician, or by instructed persons working under the direction and supervision of a
professional electrician, according to electrotechnical rules.
Only qualified professionals are allowed to work on or with the product. IEC 60364 or
CENELEC HD 384 define the qualification of these persons:
• They are familiar with set-up, installation, commissioning and operation of the product.
• They possess the qualification required for performance of their work.
• They know all regulations for the prevention of accidents, directives and laws applicable to set-up,
installation and commissioning on site, and they are able to apply the same.
• They have knowledge and skills of First Aid.
2.1. Design of safety directives
2.2. Fundamental safety directives
To Next Page
Loading...
Need help?
General
