27
To activate the multi device control, touch the button "On/O.
If the item "Auto Zoom/Foc." is active (highlighted), the zoom and focus of xtures used in the follow spot operation
will be carried out automatically (in a range as was adjusted in "1st point" and "2nd point") during moving of
the light image on the stage. If the item "Auto Zoom/Foc." is deactivated, zooming and focusing of xtures has
to be done manually.
During the follow spot operation you can deactivate any device (except the reference device). The deactivated
device remains in the original position and the rest of devices will continue in the follow spot operation. When
you activate this device back, the device "jumps" to the follow spot operation.
Example: Device 3 is deactivated (by touching the button Device 3 in the Action toolbar ).
Device 3 is activated (by touching the button Device 3 in the Action toolbar).
Action toolbar
To Next Page
Loading...
