35
6.2 Show Library
Select Show - the menu item oers 10 show libraries. In the show library is saved setting of the FollowSpot
Controller and the RoboSpot system e.g.:
Functions mapping
FollowSpot Controller presets
Position buttons
DMX addresses and modes of connected devices
RDM information about connected devices (only if the option "Manual" is selected in the menu "Discovery
Settings")
Items included in the show library can be saved on a USB ash drive.
Note: values in the menu Ethernet settings (menu Settings) are not saved to user setting.
Select desired show by touching its button and conrm it. the notice: "Switch To Show OK" will appear for a
moment on the screen.
Selected show is displayed in the bottom right corner of the screen.
Error and notice messages:
"Already In selected Show"-it means that you are trying to switch to active show .
"Switch To Show Error" -it means that some problem in desired show le occured.
All changes in setting of the RoboSpot made by the user are immediately saved into
the selected show library.
Export Show - the menu item allows you to save a show on a USB ash drive connected to the USB port of
the RoboSpot. Supported le systems of USB ash drive are: FAT16, FAT32, EXT2, EXT3, EXT4.
To export show.
1. Connect a USB ash drive to RoboSpot and select desired show (e.g. show 6) and conrm it.
To Next Page
Loading...
