13
Dynamic Range Control (DRC) - DAB
The DRC facility can make quieter sounds easier to hear when your sound
system is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1/2 Medium compression applied.
DRC 1 Maximum compression applied.
1. Press and release the On/Standby button to switch on your sound
system.
2. Press and release the Mode button until the DAB mode is selected.
3. Press and release the Menu button. The DAB menu will show on the
display.
4. Press and release the Tuning Up or Down buttons until 'DRC' appears
on the display. Press and release the Select button. The display will
show the current DRC value.
5. Press and release the Tuning Up or Down buttons to select the
required DRC setting (default is 0).
6. Press and release the Select button to confi rm the setting. After several
seconds the display will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
4,5
4,5
3
4,6
2
To Next Page
Loading...