Roberts Blutune 60 - Recalling a Preset Station

To Next Page

To Previous Page

Recalling a preset station

1. Press and release the On/Standby button to switch on the sound

system.

2. Press and release the Mode button to select either the FM or DAB

mode.

3. Press and release the Preset button. The display will show, for example,

'Empty 1' if no station has been stored to that preset. If a preset has

been stored, then the display will show either the station name (for

DAB stations) or the frequency (for FM stations).

4. Press and release the Tuning Up or Down buttons to select the

desired preset station.

5. Press and release the Select button. Your radio will tune to the chosen

preset station stored in the preset memory.