51
Auxiliary input socket
1. Connect a stereo or mono audio source (i.e. CD player, MP3 player,
etc.) to the Auxiliary input socket.
2. Press and release the On/Standby button to switch on the sound
system.
3. Press and release the Mode button until the display shows 'AUX IN'.
4. Adjust the Volume on your player and on the sound system for
comfortable listening.
5. Remove the cable from the Auxiliary input socket or press and release
the Mode button to cancel Auxiliary Input mode.
Note: If the sound system is in Auxiliary input mode with no input signal
being applied for more than 15 minutes then it will automatically switch to
the standby mode.
The display will revert to showing the standby mode
clock. To use the sound system again, simply press the On/Standby but-
ton to switch it on.
1
2
3,5
To Next Page
Loading...