19
Stereo / Mono setting - FM
Your radio will play stereo FM broadcasts in stereo provided that the
received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the sound system to play the station in mono in order to reduce
the level of background hiss.
1. Press and release the On/Standby button to switch on your sound
system.
2. Press and release the Mode button until the FM mode is selected.
3. Press and release the Menu button. The FM menu will show on the
display.
4. Press and release the Tuning Up or Down buttons until 'AUDIO'
shows on the display. Press and release the select button.
5. To switch to mono to reduce the hiss from a weak FM signal, press
and release the Tuning Up or Down buttons until 'MONO' appears
on the display. Press and release the Select button to confi rm the
setting.
6. If you wish to return to the stereo mode while listening to the currently
tuned radio station follows steps 1 to 4 above. Press and release the
Tuning Up or Down buttons until 'STEREO' shows on the display.
Press and release the Select button to confi rm the setting. The radio
will play the current station in stereo if the signal is suffi ciently strong.
4-6
4-6
3
4-6
2
To Next Page
Loading...