Roberts Blutune 60 - Setting the Clock Manually

45
Setting the clock manually
Normally your sound system will set its clock automatically using the DAB
radio signal. If no DAB signal is available and you need to set the time
manually, please follow the procedure shown below.
1. Press and release the On/Standby button to switch off the sound
system.
2. To set the clock time, press and hold the Menu button and then release
the button. The hour digits will then fl ash on the display.
3. Press and release the Tuning Up or Down buttons to set the desired
hour.
4. Press and release the Select button to enter the hour setting.
5. The minute digits will then fl ash on the display. Press and release the
Tuning Up or Down buttons to set the desired minute.
6. Press and release the Select button to enter the minute setting. The
day of the week will fl ash on the display.
7. Press and release the Tuning Up or Down buttons to set the day.
8. Press and release the Select button to enter the day setting. The update
option for the clock will then fl ash on the display. You can choose to
automatically update the clock or you can choose no update.
9. Press and release the Tuning Up or Down buttons choose 'UPDATE
Y' (Yes) or 'UPDATE N' (No). Press the Select button to confi rm the
clock settings.
3-9
3-9
4-8
1
2