Roberts Blutune 60 - Inserting a CD; Playing a CD

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
28
Inserting a CD
Ensure the CD player is empty before inserting a disc. If there is a disc
in the player then the CD loaded indicator will show on the display. If
you cannot insert a disc, press the CD Eject button to remove the CD
currently in the player.
1. Insert a disc with printed side facing up into the CD slot. The disc will
be loaded automatically. The unit will check the CD type and load its
track list. The display will show 'READING' as the information is read.
Audio CD: The total number of tracks will then be displayed.
MP3/WMA CD: The total number of fi les and albums will then be
displayed.
2. To eject a CD press and release the CD Eject button. To reload a CD
that has just been ejected, press the Eject button a second time.
3. To select the CD mode press the Mode button until 'CD' shows on the
the display.
Playing a CD
1. The CD will play automatically 10 seconds after the CD has been
inserted. Alternatively, press the Play/Pause button to start playing
the disc.
Audio CD: The display will show the current track number and the
elapsed playing time.
MP3/WMA CD: The display will show the current fi le number and the
elapsed playing time.
2. Adjust the Volume to the required setting.
3
2
1
CD
CD
CD