Robustel GoRugged R3000 Quad - Configuration -> USR LED; Configuration -> Robustvpn

Robustel GoRugged R3000 Quad User Guide
RT_UG_R3000 Quad_v.1.2.0 02.07.2015 100 / 136
Confidential
3.3 Configuration -> USR LED
This section allows users to change the display status of USR LED.
Note: Please refer to “Status” -> “System” -> “LEDs Information” -> “USR”.
USR LED
Item
Description
Default
USR LED Type
Select from “VPN”, “PPPoE”, “DynDNS” and “GPS”.
VPN
Indication
Select from “ON”, “Blink”.
For example, if “USR LED Type” is set as “VPN” and “Indication” is set as
“Blink”, when any VPN tunnel is up USR LED will blink.
ON
3.4 Configuration -> RobustVPN
This section allows users to configure the settings of RobustVPN, which is based on a hosted web service designed to
connect customer to their machines through Internet. The hosted acts as data transit platform and offer
communication originated by the customers to their machines. It is intended to be used in the industrial M2M
communication sector.