Robustel GoRugged R3000 Quad - Configuration -> L2 TP

Robustel GoRugged R3000 Quad User Guide
RT_UG_R3000 Quad_v.1.2.0 02.07.2015 81 / 136
Confidential
Remote virtual IP
Set remote IP Address of the virtual GRE tunnel.
Null
Remote Subnet
@ Remote Subnet
List
Add a static route to the remote side’s subnet so that the remote network is
known to the local network.
Null
Remote Subnet Mask
@Remote Subnet
List
Set remote subnet net mask.
Null
All traffic via this
interface
After click to enable this feature, all data traffic will be sent via GRE tunnel.
Disable
Enable NAT
Tick to enable SNAT for GRE. The source IP address of host Behind R3000 will be
disguised before accessing the remote GRE server.
Disable
Secrets
Set Tunnel Key of GRE.
Null
3.25 Configuration -> L2TP
This section allows users to set the L2TP parameters.