Robustel GoRugged R3000 Quad - Configuration -> Phone Book

Robustel GoRugged R3000 Quad User Guide
RT_UG_R3000 Quad_v.1.2.0 02.07.2015 93 / 136
Confidential
AT over IP
Item
Description
Default
Enable AT Settings
Tick to enable AT over IP to control cellular module via AT command remotely.
Disable
Protocol
Select from “TCP server” or “UDP”
UDP
Local IP
You can enter the IP address of cellular WAN, Ethernet WAN or Ethernet LAN.
Null stands for all these three IP addresses.
0.0.0.0
Local Port
Enter the local TCP or UDP listening port.
8091
3.30 Configuration -> Phone Book
This section allows users to set the Phone Book parameters.
Phone Book
Item
Description
Default
Description
Set the name to your relevant phone No.
Null
Phone No.
Enter your phone No.
Note:
In some countries, the Phone NO. is required to be written in international
format, starting with “+” followed by the country code.
Null