Robustel GoRugged R3000 Quad User Guide
RT_UG_R3000 Quad_v.1.2.0 02.07.2015 114 / 136
Confidential
The modifications will take effect after click “Apply” button.
If a customized SIM card is using, please select “Custom” instead of “Auto” in “Network Provider Type”, and some
relative settings should be filled in manually.
2. Connect on Demand
Configuration-->Link Management-->Cellular
The modifications will take effect after click “Apply” button.
Note: This section will be hidden if user selects “Cellular as primary and if fail use Eth0” in “Configuration ->Link
Management”.
Configuration-->Cellular WAN -->Basic
To Next Page