Robustel GoRugged R3000 Quad - Page 52

Robustel GoRugged R3000 Quad User Guide
RT_UG_R3000 Quad_v.1.2.0 02.07.2015 51 / 136
Confidential
 When Select Protocol “Transparent Over Rlink”:
 When Select Protocol “Modbus Over Rlink”:
 When Select Protocol “AT Over COM”:
 When Select Protocol “GPS Report”:
RS232 @ Serial
Item
Description
Default
Baud-rate
Select from “300”, “600”, “1200”, “2400”, “4800”, “9600”, “19200”, “38400”,
“57600” , “115200”and “230400”.
115200
Data bit
Select from “7” and “8”.
8
Parity
Select from “None”, “Odd” and “Even”.
None
Stop bit
Select from “1” and “2”.
1
Flow control
Select from “None”, “Software” and “Hardware”.
None
Protocol
Select from “None”, “Transparent”, “Modbus”, “Transparent Over Rlink”,
None