Robustel GoRugged R3000 Quad - Page 90

Robustel GoRugged R3000 Quad User Guide
RT_UG_R3000 Quad_v.1.2.0 02.07.2015 89 / 136
Confidential
PPTP Server @ PPTP
Item
Description
Default
Enable PPTP Server
Tick to enable PPTP server.
Disable
Username
Set the username which will assign to PPTP client.
Null
Password
Set the password which will assign to PPTP client.
Null
Authentication
Select from “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
PPTP client need to select the same authentication method based on this
server’s authentication method.
CHAP
Local IP
Set the IP address of PPTP server.
10.0.0.1
IP Pool Start
Set the IP pool start IP address which will assign to the PPTP clients.
10.0.0.2
IP Pool End
Set the IP pool end IP address which will assign to the PPTP clients.
10.0.0.100
Enable MPPE
Tick to enable MPPE (Microsoft Point-to-Point Encryption). It’s a protocol for
encrypting data across PPP and VPN links.
Disable
Show PPTP Server
Advanced
Tick to show the PPTP server advanced setting.
Disable
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as default.
Enable
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as default.
Enable
Asyncmap Value
One of the PPTP initialization strings. In general, you don’t need to modify
this value.
ffffffff
MRU
Maximum Receiving Unit. It is the identifier of the maximum size of packet,
which is possible to receive in a given environment.
1500
MTU
Maximum Transmission Unit. It is the identifier of the maximum size of
packet, which is possible to transfer in a given environment.
1436
Link Detection
Interval
Specify the interval between PPTP client and server.
To check the connectivity of a tunnel, the client and server regularly send
PPP Echo to each other. If the client or server receives no response from the
peer within a specified period of time, it retransmits the PPP echo. If it
receives no response from the peer after transmitting the PPP echo for max
retries times, it considers that the PPTP tunnel is down and tries
tore-establish a tunnel with the peer.
30
Link Detection Max
Retries
Specify the max retries times for PPTP link detection.
5
Expert Options
You can enter some other PPP initialization strings in this field. Each string
can be separated by a space.
noccp
nobsdcomp
Route Table List
Click “Add” to add a route rule from PPTP server to PPTP client.
Null