Robustel R1510 User Manual

Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 119/140
XML command:
<lan>
<network max_entry_num="2">
<id>1</id>
<interface>lan0</interface>
<ip>172.16.24.24</ip>
<netmask>255.255.0.0</netmask>
<mtu>1500</mtu>
SMS cmd:
set lan network 1 interface lan0
set lan network 1 ip 172.16.24.24
set lan network 1 netmask 255.255.0.0
set lan network 1 mtu 1500
3. The semicolon character (‘;’) is used to separate more than one command packed in a single SMS.
4. E.g.
Password mode—admin:admin;status system
In this command, username is “admin”, password is “admin”, The control command is status system, and the
function of the command is to get the system status.
SMS received:
firmware_version = 3.1.0
firmware_version_full = "3.1.0 (Rev 2781)"
hardware_version = 1.0.2
kernel_version = 4.9.152
device_model = R1510-4L
serial_number = 04870119080031
uptime = "0 days, 00:25:13"
system_time = "Wed Sep 11 13:48:40 2019"

Robustel R1510 Specifications

General

Brand	Robustel
Model	R1510
Category	Network Router
Language	English