Robustel R1510 - R1510 Factory Default Settings; Logging into the R1510 Router Interface

Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 25/140
3.2 Factory Default Settings
Before configuring your router, you need to know the following default settings.
Item
Description
Username
admin
Password
admin
ETH0
WAN mode or
192.168.0.1/255.255.255.0, LAN mode
ETH1
192.168.0.1/255.255.255.0, LAN mode
DHCP Server
Enabled
3.3 Log in the Router
To log in to the management page and view the configuration status of your router, please follow the steps below.
1. On your PC, open a web browser such as Internet Explorer and Google, etc.
2. From your web browser, type the IP address of the router into the address bar and press enter. The default IP
address of the router is http://192.168.0.1/, though the actual address may vary.
3. In the login page, enter the username and password, choose language and then click LOGIN. The default
username and password are “admin”.
Note: If enter the wrong username or password over six times, the login web will be locked for 5 minutes.