Robustel R1510 - R1510 System Services Management

Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 95/140
Enable NAT
Click the toggle button to enable/disable this option. This option must
be enabled when router under NAT environment.
OFF
Secrets
Set the key of the GRE tunnel.
Null
Link binding
Select from "WWAN1", "WAN", or "WLAN".
Not bound
Status
This section allows you to view the GRE tunnel status.
4.5 Services
4.5.1 Syslog
This section allows you to set the syslog parameters. The system log of the router can be saved in the local, also
supports to be sent to remote log server and specified application debugging. By default, the “Log to Remote” option
is disabled.
The window is displayed as below when enabling the “Log to Remote” option.