Robustel R1510 User Manual

Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 96/140
Syslog Settings
Item
Description
Default
Enable
Click the toggle button to enable/disable the Syslog settings option.
ON
Syslog Level
Select from “Debug”, “Info”, “Notice”, “Warning” or “Error”, which from low to
high. The lower level will output more syslog in detail.
Debug
Save Position
Select the save position from “RAM”, “NVM” or “Console”. Choose “RAM”, the
data will be cleared after reboot.
Note: It's not recommended that saving syslog to NVM (Non-Volatile Memory)
for a long time.
RAM
Log to Remote
Click the toggle button to enable/disable this option. Enable to allow router
sending syslog to the remote syslog server. You need to enter the IP and Port of
the syslog server.
OFF
Add Identifier
Click the toggle button to enable/disable this option. When enabled, you can add
serial number to syslog message which used for loading Syslog to RobustLink.
OFF
Remote IP Address
Enter the IP address of syslog server when enabling the “Log to Remote” option.
Null
Remote Port
Enter the port of syslog server when enabling the “Log to Remote” option.
514

Robustel R1510 Specifications

General

Brand	Robustel
Model	R1510
Category	Network Router
Language	English