Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 18/140
3. Do not bend or scratch the card.
4. Keep the card away from electricity and magnetism.
5. Make sure router is powered off before inserting or removing the card.
2.6 Attach External Antenna (SMA Type)
Attach an external SMA antenna to the router’s antenna connector and twist tightly. Make sure the antenna is within
the correct frequency range provided by the ISP and with 50 Ohm impedance.
Note: Recommended torque for tightening is 0.35 N.m.
2.7 Mount the Router
The router can be placed on a desktop or mounted to a wall or a 35 mm DIN rail.
Two methods for mounting the router
1. Wall mounting (measured in mm)
Option 1
SMA-J antenna for cellular
connection
RP-SMA-J antenna for WLAN
connection
To Next Page
Loading...
Need help?
General
