Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 57/140
Note: WiFi is off by default. Follow the steps below to enable it and configure the router as WiFi client.
WiFi Client
Configure Router as WiFi Client
Click Interface > WiFi > WiFi, select “Client” as the mode and regarding the AP type to choose the related Client Band
then click “Submit”.
And then a “WLAN” column will appear under the Interface list.
Click Interface > Link Manager > Link Settings, and click the edit button of WLAN, then configure its related
parameters.
Click Interface > WLAN to configure the parameters of WiFi Client after setting the mode as Client.
To Next Page
Loading...
Need help?
General
