Robustel R1510 User Manual

Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 33/140
Link Settings (WWAN)
Item
Description
Default
Billing Day
Specify the monthly billing day. The data traffic statistics will be
recalculated from that day.
1
Ping Detection Settings
Enable
Click the toggle button to enable/disable the ping detection mechanism, a
keep-alive policy of the router.
ON
Primary Server
Router will ping this primary address/domain name to check that if the
current connectivity is active.
8.8.8.8
Secondary Server
Router will ping this secondary address/domain name to check that if the
current connectivity is active.
114.114.11
4.114
Interval
Set the ping interval.
300
Retry Interval
Set the ping retry interval. When ping failed, the router will ping again
every retry interval.
5
Timeout
Set the ping timeout.
3
Max Ping Tries
Set the max ping tries. Switch to another link or take emergency action if
the max continuous ping tries reached.
3
Advanced Settings
NAT Enable
Click the toggle button to enable/disable the Network Address Translation
option.
ON
Upload Bandwidth
Set the upload bandwidth used for QoS, measured in kbps.
10000
Download Bandwidth
Set the download bandwidth used for QoS, measured in kbps.
10000
Overrided Primary
DNS
Override primary DNS will override the automatically obtained DNS.
Null
Overrided Secondary
DNS
Override secondary DNS will override the automatically obtained DNS.
Null
Debug Enable
Click the toggle button to enable/disable this option. Enable for debugging
information output.
ON
Verbose Debug Enable
Click the toggle button to enable/disable this option. Enable for verbose
debugging information output.
OFF
WAN
Router will obtain IP automatically from DHCP server if choosing “DHCP” as connection type. The window is
displayed as below.

Robustel R1510 Specifications

General

Brand	Robustel
Model	R1510
Category	Network Router
Language	English