Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 38/140
Indicate the ordinal of the list.
Show the type of the link.
Enter a description for this link. It can be null.
Select from “DHCP” or “Static”.
Enter a 1-32 characters SSID which your router wants to connect. SSID
(Service Set Identifier) is the name of your wireless network.
Click the toggle button to enable/disable this option. When router works
as Client mode and needs to connect any access point which has hidden
SSID, you need to enable this option.
Enter an 8-63 characters password of the access point which your router
wants to connect.
Enter the IP address with Netmask which can access the Internet,
e.g. 192.168.1.1/24
Enter the IP address of WiFi AP.
Click the toggle button to enable/disable the ping detection mechanism, a
keepalive policy of the router.
Router will ping this primary address/domain name to check that if the
current connectivity is active.
Router will ping this secondary address/domain name to check that if the
current connectivity is active.
Set the ping retry interval. When ping failed, the router will ping again
every retry interval.
Set the max ping tries. Switch to another link or take emergency action if
To Next Page
Loading...
Need help?
General
