Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 46/140
The window is displayed as below when choosing “Auto” as the network type.
The window is displayed as below when choosing “Specify” as the band select type.
Indicate the ordinal of the list.
Set the currently editing SIM card.
Enter the phone number of the SIM card.
Enter a 4-8 characters PIN code used for unlocking the SIM.
Enter the AT commands used for cellular initialization.
Specify the Port listening of telnet service, used for AT over Telnet.
Cellular Network Settings