Robustel R1510 User Manual

Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 72/140
information output to the debug port.
Tunnel
Click to add tunnel settings. The maximum count is 6.
General Settings @ Tunnel
Item
Description
Default
Index
Indicate the ordinal of the list.
--
Enable
Click the toggle button to enable/disable this IPsec tunnel.
ON
Description
Enter a description for this IPsec tunnel.
Null
Gateway
Enter the address of remote side IPsec VPN server. 0.0.0.0 means for any
address.
Null
Mode
Select from “Tunnel” and “Transport”.
 Tunnel: Commonly used between routers, or at an end-station to a router,
the router acting as a proxy for the hosts behind it
 Transport: Used between end-stations or between an end-station and a
router, if the router is being treated as a host-for example, an encrypted
Telnet session from a workstation to a router, in which the router is the
actual destination
Tunnel
Protocol
Select the security protocols from “ESP” and “AH”.
 ESP: Use the ESP protocol
 AH: Use the AH protocol
ESP
Local Subnet
Enter the local subnet’s address with mask protected by IPsec, e.g.
Null

Robustel R1510 Specifications

General

Brand	Robustel
Model	R1510
Category	Network Router
Language	English