Meter setup
33
Units
Use this setting to select the unit(s) of measure to be displayed with the results.
1 From the main menu screen, touch
Setup.
2 From the Setup menu screen, touch
Screen.
3 From the Screen menu screen, touch
Result Units.
4 Touch the screen prompt to select
the unit of measure of choice. Your
selection is now displayed with a black
background.
5 After you make your selection, touch
(OK) to save, or touch (Cancel)
to cancel this procedure. The program
automatically returns to the Screen
menu.
The current unit of measure setting
is shown with white type on a black
background. You can select either:
n INR
n INR and seconds
n INR and Quick value in %
To Next Page
Loading...
