Switching on the meter
Without operator list
Testing a capillary blood sample
62
1 Place the meter on a level, vibration-
free surface, or hold it in your hand so
it is roughly horizontal. Turn the meter
on by pressing the On/Off button
and holding until the meter turns on.
Alternatively, you can insert a test strip
or connect it to the power adapter to
turn it on.
The next steps depend on whether you
work with or without operator lists.
2 Wait until the main menu is displayed.
If no operator list exists, go to Step 8.
Main Menu
09:15 am
09/16/2009
Control Test
Review Results
Setup
Patient Test
To Next Page
Loading...
