Roche CoaguChek XS Plus - Setting the Display Options for Date and Time

Meter setup
38
Setting the display options for date and time
You don’t have to select display options for date and time, even though you must enter
the date and time. However, if you want to reset the time and date formats, first go to the
Setup menu.
5 Touch the screen prompt with the display
format of your choice for date and time.
Your selection is now displayed with a
black background.
6 When you have entered both settings,
touch (OK) to save, or touch
(Cancel) to cancel this procedure. The
program automatically returns to the
Date/Time menu.
7 Touch the back arrow to return to
the Screen menu screen.
The current factory default settings
are shown with white type on a black
background. You can select one of the
following display formats:
n DD.MM.YYYY, e.g., 15.06.2007
n MM/DD/YYYY, e.g., 06/15/2007
n YYYY-MM-DD, e.g., 2007-06-15
n Time: 24H or 12H
1 From the main menu screen, touch
Setup.
2 From the Setup menu screen, touch
Screen.
3 From the Screen menu screen, touch
Date/Time.
4 From the Date/Time menu screen, touch
Format to set the display format.
Main Menu
09:15 am
09/16/2009
Control Test
Review Results
Setup
Patient Test
Setup Menu
09:15 am
09/16/2009
ID Setup
Lockouts
Options
Screen
Screen
09:15 am
09/16/2009
Language Selection
Date / Time
Result Units
Contrast
Format
09:15 am
09/16/2009
Date:
DD.MM.YYYY
MM/DD/YYYY
YYYY-MM-DD
Time:
24H 12H
Date/Time
09:15 am
09/16/2009
Format
Set Time
Set Date