Meter setup
45
System Administrator (Admin.)
In the default setting, the meter is not protected with an Admin. password, and all setup
options are accessible to anyone. If you set up a Admin. password, the following setup areas
are automatically reserved only for the Admin:
n Screen: Units, Date/Time
n Options: (connection to a) computer
n ID Setup (the entire area)
n QC Lockout
n Operator Lockout (only available with optional software)
If an Admin. password has not
been set up yet:
Please note: When you enter a Admin. password, this password must be entered from
this point forward before a password can be set up (anywhere in the ID Setup menu). The
Admin. password also must be entered before you can delete or change it.
1 From the main menu screen, touch
Setup.
2 From the Setup menu screen, touch
ID Setup.
3 Touch Admin..
To Next Page
Loading...
