Roche CoaguChek XS Plus - Setting the Time

Meter setup
37
Setting the time
When you turn on the meter for the first time (or after a long period without power), the Setup
menu appears automatically after you set the date. If at a later time a time adjustment is
needed, go to the Setup menu, then select the input field of choice.
1 From the main menu screen, touch
Setup.
2 From the Setup menu screen, touch
Screen.
3 From the Screen menu screen, touch
Date/Time.
4 From the Date/Time menu screen, touch
Set Time to set the time.
5 Touch
or to set the hours, then
the minutes. Touch AM or PM.
6 When you have entered these settings,
touch
(OK) to save, or touch
(Cancel) to cancel this procedure. The
program automatically returns to the
Date/Time menu.
If the Setup menu appeared automatically
after turning the meter on, you must
press to complete the first time
setting.
7 Touch the back arrow to return to
the Screen menu screen.
Main Menu
09:15 am
09/16/2009
Control Test
Review Results
Setup
Patient Test
Setup Menu
09:15 am
09/16/2009
ID Setup
Lockouts
Options
Screen
Screen
09:15 am
09/16/2009
Language Selection
Date / Time
Result Units
Contrast
Time
09:15 am
09/16/2009
Minute:
59
Hour:
9
AM PM
Date/Time
09:15 am
09/16/2009
Format
Set Time
Set Date