Operator (only available with optional software)
To specify operators, an operator list must be created on the PC and downloaded into the
meter using software. In the default setting, the meter is not set up for use with Operator
ID numbers. You can enter settings to activate or deactivate the use of the operator list.
Otherwise, the Operator screen prompt is not active (gray).
Meter setup
49
1 From the main menu screen, touch
Setup.
2 From the Setup menu screen, touch
ID Setup.
3 Touch Operator.
4 Touch the screen prompt with the
setting of choice (active or inactive) for
setting up the Operator ID number. Your
selection is now displayed with a black
background.
5 When you have made your selection,
touch (OK) to save, or touch
(Cancel) to cancel this procedure. The
program automatically returns to the ID
Setup menu.
If Operator ID numbers are
available:
To Next Page
Loading...
