Meter setup
41
4 Touch the screen prompt with the desired
setting for the beeper, then touch the
prompt with the setting of choice for
the key click. Both selections are now
displayed with a black background.
5 When you have entered both settings,
touch (OK) to save, or touch
(Cancel) to cancel this procedure. The
program automatically returns to the
Options menu.
The current setting is shown with white type
on a black background. You may select from
the following options:
For the beep tone
n Off
n Low
n Medium
n High
For the key click
n On
n Off
1 From the main menu screen, touch
Setup.
2 From the Setup menu screen, touch
Options.
3 From the Options menu screen, touch
Beeper.
To Next Page
Loading...
