Roche CoaguChek XS Plus - Page 65

Without patient list
Testing a capillary blood sample
65
10 Touch Patient Test.
11 If the Patient ID option was chosen as
either optional or required when the
meter was set up (see Meter Setup,
ID Setup), you are prompted to enter
a Patient ID.
If required, enter the Patient ID, then
press (OK) to move to the next
screen.
If optional, ignore the prompt and
press (OK) to move to the next
screen. The meter will assign the test
a consecutive number.
If neither option was chosen, a screen
appears that prompts you to insert a
test strip.
If no patient list exists, go to Step 15.
Patient ID
A
|
BC
DE
FGHI J
KLMNO
PQRST
U VWXY
Z,123
09:15 am
Scan