Roche Diagnostics
Urisys 1100® · ≥5.7 · Operator's Manual · 9.0
14 4. Software
4. Software
4.1 Overview
The Urisys 1100
®
system software provides a user
interface that enables all laboratory-specific settings and
recurrent functions to be selected via the liquid crystal
display and function keys.
u For more information, see:
4.2 Menu structure (Flowchart) (15)
4.3 Menu functions (17)
The three function keys assume the particular function
displayed on the second line of the liquid crystal display.
The first line of the display is used for system status and
user information.
The user interface is self-explanatory, so that only details
of the major functions are presented here.
q Pressing the START button within any submenu
accepts the chosen analyzer state or function, and returns
the system from menu display to Ready-to-Measure
status.
The analyzer switches from the Ready-to-Measure status
or the status displayed, respectively, to the Standby mode
after 5 minutes of function key inactivity. During Standby,
the date and time are displayed. Ready-to-Measure-
status can be resumed by pressing the START key, except
when certain error messages are displayed.
u 10. Error messages and troubleshooting (46)
To Next Page
Loading...
Need help?
General
