Roche Diagnostics
Urisys 1100® · ≥5.7 · Operator's Manual · 9.0
8. Reading test strips 37
8.3 Patient report
The patient report is printed out together with the
sequence number, device ID, operator ID, date and time.
The patient’s name will also appear on the print out if
entered prior to measurement.
u 8.6 Entering Patient ID, Operator ID and
Authentication Password (39)
Test results which diverge from negative or normal values
are flagged with an asterisk before the parameter
concerned.
For selection of concentration units and the order of
parameters in the patient report, see the following
section.
u 4.3 Menu functions (17)
An asterisk printed in the line below the heading but
before the first parameter of the test results list indicates
that the reading was taken with changed range limits.
u 4.5 Changing the range limits (22)
Tear off the printout, if desired, by pulling it horizontally
over the edge.
WARNING:
Thermal printing paper is sensitive to light and
liable to age on prolonged exposure to bright light.
Patient reports are thus best kept in a place away
from light and high temperature.
To Next Page
Loading...
Need help?
General
