Roche Diagnostics
Urisys 1100® · ≥5.7 · Operator's Manual · 9.0
34 8. Reading test strips
Automatic Patient ID
The Urisys 1100
®
system will assign automatically unique
serial numbers to the tests results which have no Patient
IDs. These unique numbers are ascending serial numbers
based on the total number of tests performed on the
analyzer and cannot be altered nor cleared.
Standby Mode Whenever there has been five minutes of inactivity, the
analyzer automatically switches to Standby mode. The
test strip tray advances slightly so as to close the
retaining bar, and the display shows the date and time.
The analyzer resumes Ready-to-Measure status when the
START button is pressed.
8.2 Performing a measurement in Normal Mode (for
Single Readings)
The Urisys 1100
®
system is ready to read when the
display shows a sample number and INSERT STRIP!.
BIOHAZARD:
Always wear protective gloves when handling and
disposing of samples of human origin.
ATTENTION:
To ensure that urinalysis is carried out correctly,
read the package insert included with the test
strips.
To Next Page
Loading...
Need help?
General
